Next Tuesday 24 October our association meet you at NXP Technology Days Milano , we show our Powerboard Tyche prototype along with our Eclipse Notebook chassis.
Participation is free, registration needed, if you like you can do it below.
As we stated in a previous article, we have already contracted ACube Systems and the PCB design work has started. This post is a first report about the work in progress in relation to the PCB design.
These days, the designer is analyzing the Pericom Switch with the direct support of Pericom personnel.
The Pericom PI7C9X2G608GP is a PCIE Gen 2 Switch that provides one upstream port supporting x4 or x1, and 4 or 5 downstream ports that support x1 operation. This chip has a Power Dissipation of 1.2 W.
In our mobo the PI7C9X2G608GP is essential as it allows to connect one 4x PCIe 2.0 controller of the NXP T2080 CPU with four 1x PCIe chips/cards: M.2 3G/LTE card , M.2 WiFi card, 1x Renesas USB3 Controller and 1x C-Media Audio chipset.
Segnati la data della nostra campagna di donazione di PCB (dettagli sotto), ora che gli schemi elettrici che sono usciti dalla prima campagna di donazione sono nelle nostre possesso.
Gli schemi sono ora in fase di revisione da parte dei nostri volontari (esperti di)hardware e, allo stesso tempo, durante questo mese, abbiamo preparato i passaggi per certificare la nostra progettazione hardware come hardware Open Source seguendo la procedura di certificazione OSWHA.
Conformità Open Hardware
OSHWA Processo di Certificazione
Attraverso i nostri colleghi OSWHA, abbiamo contattato la NYU Technology Law and Policy Clinic, che ci hanno aiutato gratuitamente a vedere come potremmo certificare il progetto della scheda madre come Hardware Open Source. Studenti e Professori di questa facoltà hanno analizzato come trovare il percorso migliore per ottenere la certificazione OSHWA. Nel frattempo, abbiamo contattato i fornitori di chip per verificare il loro accordo di distribuzione come hardware open source dei nostri schemi elettrici e del futuro progetto PCB. Tra gli altri, NXP ha risposto positivamente. Con la Law and Policy Clinic abbiamo studiato approfonditamente le implicazioni pratiche dei requisiti per la certificazione Open Hardware OSWHA e abbiamo verificato il nostro approccio con il lo staff di OSWHA.
Quindi la maggior parte dei datasheet dei chip usati nei nostri schemi sono liberamente scaricabili come puoi vedere qui sotto.
Una parte importante dell’essere considerati compatibili con Open Hardware (certificazione OSHWA Open Hardware), implica che tutto ciò che è sotto il nostro controllo e che è utile per produrre la nostra scheda madre, dovrebbe essere divulgato pubblicamente, tali schemi, PCB, files Gerber e tutte le loro informazioni di accompagnamento. Ancora è Open Hardware Se abbiamo fatto ciò che era in nostro potere per utilizzare i componenti aperti, ma una fonte di terze parti ci impone restrizioni per condividere alcune informazioni relative ai loro componenti utilizzati nel nostro progetto. (Fermo restando che è Open Hardware)
Appuntati la data della nostra campagna di donazione di PCB: metà gennaio 2019.
Sarà il momento in cui metteremo a disposizione del pubblico gli schemi elettrici revisionati che siamo stati in grado di ottenere grazie alla precedente campagna.
Se hai riservato alcune donazioni al nostro progetto per il Natale, puoi donare utilizzando la vecchia campagna di donazioni, che verrà trasferito automaticamente alla campagna PCB, oppure puoi aspettare fino a metà gennaio quando inizierà la campagna di donazione di PCB. Per favore se possibile “avvisa” anche altre persone appassionate sulla campagna imminente.
Elenco completo
dei componenti
Avendo ricevuto la versione definitiva degli schemi elettrici – stiamo attualmente rivedendoli prima della pubblicazione – l’elenco dei componenti è ora anche completo, anche se la revisione potrebbe comportare poche modifiche minori.
I connettori esterni del laptop, che dipendono dallo chassis del notebook, non sono definitive a causa dell’interdipendenza con il telaio del laptop, saranno aggiunti in seguito quando il telaio del notebook sarà finalmente selezionato.
Troverete i dettagli relativi a una parte significativa dei componenti selezionati nelle schede tecniche che accompagnano gli schemi elettrici che saranno resi disponibili pubblicamente a metà gennaio, nonostante a volte potrebbe essere richiesto di autenticarsi.
Bookmark the date of our PCB donation campaign (details below), now that the electrical schematics that came out of the first donation campaign are in our hands.
The schematics are now under review by our hardware volunteers and at the same time, during this month, we have been preparing the steps to certify our hardware design as Open Source Hardware following the OSWHA Certification procedure.
Open Hardware Compliance
OSHWA Certification Process
Through our OSWHA colleagues, we contacted the NYU Technology Law and Policy Clinic. They helped us for free to see how we could certify the motherboard project as Open Source Hardware. Students and Professors of the Clinic have analyzed how to find the best path to achieve OSHWA certification. In the meantime we have contacted the chips vendors to verify their agreement to distribute as Open Source Hardware our electrical schematics and the future PCB design. Among others, NXP has answered positively. With the Law and Policy Clinic we have extensively studied the practical implications of the requirements for the OSWHA Open Hardware certification, and cross-checked our approach with OSWHA personnel.
So most of the datasheets of the chips used in our schematics are freely downloadable as you can see below.
An important part of being considered Open Hardware compliant ( OSHWA Open Hardware certification), imply that everything that is under our control and that is useful to produce our motherboard, should be publicly disclosed, such schematics, PCB, Gerber-files and all their accompanying information. Still is Open Hardware If we have done what was in our power to use open components, but a third-party sources impose us restrictions to share some information related to their components used in our design.
Bookmark the date of our PCB donation campaign
Bookmark the starting date of the PCB donation campaign: mid-January 2019.
That is going to be the time when we will make publicly available the reviewed electrical schematics that we were able to obtain thanks to the previous campaign. If you have reserved some donations to our project for the Christmas you can donate using the old donation campaign, will be automatically transferred to the PCB campaign, or you can wait until mid-January when will start of the PCB donation campaign. Please if possible “alert” even other passionate people about the imminent campaign.
Finalized list of components
Having received the finalized version of the electrical schematics – we are currently revising them prior to publication- the list of components is now also finalized, even if the revision could imply few minor changes.
The laptop external connectors, that depends from the notebook chassis, are not final due to the interdependence with the laptop chassis, will be added later when the notebook chassis will be finally selected.
You will find the details related to a significant part of the selected components in the datasheets accompanying the electrical schematics that will be made publicly available in mid-January, despite sometimes a login could be required.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.