Eureka! Abbiamo il layout della Board! 15 giorni per donare 3660 euro rimanenti.

Siamo felici di condividere con tutti i donatori e chi ci segue il Layout della scheda madre del nostro PPC64 Notebook Motherboard!

Il design del nostro layout della scheda è progettato su misura per inserirsi all’interno del corpo dello Slimbook Eclipse. La progettazione del PCB è attualmente in lavorazione con Mentor Xpedition.

In September 2020 we have published on our gitlab repository the Orcad source file with the latest version (v0.6) of the Electrical Schematics, you can go more deep on these board layout starting from the Orcad source.

Nel settembre 2020 abbiamo pubblicato sul nostro repository gitlab il file sorgente Orcad con l’ultima versione (v0.6) dello Schema Elettrico. Partendo dal sorgente dello Schema Elettrico è possibile mappare tutti i componenti presenti nel Layout.

Open Hardware PowerPC Notebook Board Layout per Slimbook Eclipse Body – Sopra
Open Hardware PowerPC Notebook Board Layout per Slimbook Eclipse Body – Sotto

Il termine provvisorio per la Fase 1B è il 2 novembre, quindi rimangono due settimane per donare i restanti 3660 euro. Se raggiungeremo l’obiettivo, il PCB con la simulazione del bus SI dovrebbe essere pronto per la fine di novembre.

In questo caso nel Dicembre 2020 lavoreremo alla produzione dei Prototipi insieme alla Campagna di Donazione Prototipi.

Dobbiamo dare un nome alla scheda madre, i suggerimenti rimangono ancora aperti qualche giorno in più sul nostro forum

Eureka! Here we have the Board layout! 15 days to donate 3660 euro left.

We are happy to share to all the donors and followers the Board Layout of our PPC64 Notebook Motherboard!!!

The design of our board layout is meant to fit inside the Slimbook Eclipse body. The PCB Design which is currently being worked on using Mentor Xpedition.

In September 2020 we have published on our gitlab repository the Orcad source file with the latest version (v0.6) of the Electrical Schematics, you can go more deep on these board layout starting from the Orcad source.

Open Hardware PowerPC Notebook Board Layout for Slimbook Eclipse Body – TOP
Open Hardware PowerPC Notebook Board Layout for Slimbook Eclipse Body – BOTTOM

The tentative deadline for Phase1B is 2th November so there are two weeks left to donate the remaining 3660 euros. If we will reach the goal, the PCB with SI bus simulation should be ready by the end of November.

In this case in December 2020 we will work on production of the Prototypes together with the Prototypes Donation Campaign.

We have to give a name to the motherboard, suggestions still remain open few days more on our forum