26 novembre 2019 – Foto di una parte dei partecipanti a ViLug ai nostri discorsi
È la prima volta
che Power Progress Community e Acube Systems presentavano insieme il
progetto. Questa presentazione è molto completa.
Ringraziamo molto LugVi per l’organizzazione perfetta e l’eccellente lavoro di editing video svolto con Olive in Flathub e la buona partecipazione di persone molto attive ed esperte nel software libero e competenti nell’hardware, che provenivano da tutta l’area (Veneto). È stato molto emozionante ed è stato un piacere rispondere a tutte le domande!
Video della nostra presentazione all’SFscon di Bolzano
Il video della nostra presentazione si è tenuto il 15 novembre alla conferenza sul software libero sfscons.it a Bolzano, in Alto Adige – Italia – dove abbiamo parlato di “L’effetto farfalla di una scheda madre per notebook hardware aperto”.
Gli schemi elettrici sono ancora in fase revisione da parte dei nostri volontari che si occupano dell’hardware e da parte della stessa Acube. Speriamo di pubblicare la prima versione di schema entro la fine di febbraio nel nostrorepository gitlab. Trattandosi di work in progress pubblicheremo solo il pdf. Pubblicheremo il file OrCad quando lo schema elettrico sarà completato. Contemporaneamente cominceremo la campagna di donazioni per il disegno del PCB.
Pensiamo di iniziare la raccolta fondi prima della fine di febbraio 2019.
È possibile trovare maggiori informazioni sui componenti nello schema elettrico pubblicato nel precedente post
SFSCon Bolzano: Novembre 2019
Il 16 novembre 2018 alla SFSCon (Free Software Conference) di Bolzano abbiamo presentato il nostro progetto nella sala grande alla presenza di circa cento persone, benché fosse tardi ed eravamo i penultimi.
Abbiamo parlato dei passi fatti dal nostro progetto di Notebook basato su Open Hardware PowerPc GNU/Linux. Abbiamo mostrato una preview dello schema elettrico e dato informazioni sui prossimi passi. È stato un onore presentare il nostro progetto vicino a importanti speaker e appena prima di Simon Phipps, il Presidente della Open Source Initiative (OSI). Siamo molto grati a IDM Südtirol e al Linux User Group di Bolzano (organizzatori della Free Software Conference?) per l’opportunità che ci hanno dato. Potete trovare il programma della SFSCon a questo link.
Stand al Paris Open Source Summit (POSS) – Francia – Dicembre 2018
La Power Progress Community è stata rappresentata per la prima volta all’Open Source Summit che si è tenuto dal 5 al 6 dicembre 2018 nelle vicinanze della capitale francese.
L’annuale
evento Open Source Summit è focalizzato sulla promozione di free e
open source software nella regione di Parigi, riunendo sia le varie
realtà associative che le aziende.
Per la nostra
prima presenza abbiamo incontrato molti visitatori interessati alla
nostra inziativa.
Siamo grati al team Parinux.org e Franciliens.net per averci permesso di partecipare a POOS – Open Source Summit.
POSS 2018 – Eduard that inform about our PowerPC Notebook project
Open Source Laptop – progetto dello chassis
Grazie ad alcuni collaboratori è stato impostato il progetto per un futuro chassis per laptop Open Source realizzato con FreeCad. Puoi trovare il progetto nel nostro repository.
Per maggiori informazioni puoi consultare il sito dedicato.
Se vuoi collaborare al progetto dell’Open Source Laptop chassis per favore contattaci.
Compilazione nel Minicloud
Vogliamo ringraziare l’Università di Campinas in Brasile per il supporto e l’eccellente servizio (che si chiama Minicloud) che stanno offrendo. Minicloud fornisce accesso libero a delle istanze POWER che possono essere usate per lo sviluppo, test e migrazione di applicazioni. Le macchine virtuali di Minicloud giranosu OpenStack, che supporta il funzionamentodi un grande numero di macchine virtuali su un singolo server Linux scalabile. Stiamo usando la loro infrastruttura per compilare la nostra distribuzione basata su Yocto. Al momento stiamo aggiornando tutto il progetto a Yocto 2.6 e questo lavoro viene eseguito in una Minicloud VM. Se hai un progetto che segue le regole di base spiegate in precedenza puoi chiedere un account qui a questo link: https://minicloud.parqtec.unicamp.br/minicloud/
The schematics are still under review by our hardware volunteers and Acube itself, we hope to publish the initial schematic design before the end of February 2019 in our gitlab repository. It will be a Work-In-Progress schematic design. As the schematic design is a Work-In-Progress we will only publish the pdf. We will publish the Orcad files when the schematic design will be finalized. In parallel to the schematic design being released to the public, we will begin the PCB Layout Donation Campaign.
The schematics will be updated later including all laptop external connectors actually present on the laptop chassis, due to the selection of the chassis to use is still pending.
We plan to begin the PCB Layout Donation Campaign before the end of February 2019.
You can find more information related to the chip components inside the schematic design you can find in the previous post
Sfscon Bolzano – Italy – November 2018
At 16th November 2018 at Sfscon.it we have made our project presentation speech in the bigger room with the presence of around one hundred people ( even though it was late and it was the penultimate) .
We have talked about the steps done by us for our project of Open Hardware PowerPC GNU/Linux based Notebook. We have disclosed a preview of our electrical schematics and informed about the next steps.It was for us an honour to present our project near important speakers and just before Simon Phipps which is the President at the Open Source Initiative (OSI). We thanks so much IDM Südtirol and Linux User Group Bozen-Bolzano-Bulsan of the Free Software Conference Bozen, South Tyrol, that are the organizers for such an opportunity. You can find the program of the Sfscon 2018 at this link.
Stand at Paris Open Source Summit (POSS) – France – December 2018
Power Progess Community was represented for the first time at the Open Source Summit held from December 5 to 6, 2018 in the vicinity of the French capital
The annual Open Source Summit event focuses on the promotion of free and open source softwares in the Paris region, bringing together both the various associative communities and companies. We had for a first presence many visitors interested in our initiative.
We’d like to thank the team at Parinux.org and Franciliens.net to allow us to participate to the POSS event. Open Source Summit – Paris – December 2018
POSS 2018 – Eduard that inform about our PowerPC Notebook project
Open Source Laptop Chassis Design
Thanks to some collaborators there is a first setup of the design of a future Open Source laptop chassis design, done in FreeCad. You can find the design in our repo.
If you like to collaborate to the Open Source Laptop chassis design please contact us.
For more information you can check in the dedicated site
Building in the Minicloud
We want to thank the University of Campinas in Brazil for their support and for the excellent service (called Minicloud) they are offering. The Minicloud provides free access to POWER virtual machines that can be used for development, testing or migration of applications to POWER. The virtual machines of Minicloud run on OpenStack, which supports running a large number of virtual machines on a single scale-out Linux server. We are using their infrastructure to build our Yocto based distribution. Currently we are upgrading all the project to Yocto 2.6 and this task is being performed in a Minicloud VM. If you have a project which follows the basic rules explained before, you can ask for an account here https://minicloud.parqtec.unicamp.br/minicloud/ .
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.