Four months have passed since we started our donation campaign aimed at the PCB design and we are now at around €6500 (27%) of the goal €24000 for the entire phase 1 of the design, and we must admit that the rate of donations is slower than what we had hoped for.
Phase 1 is subdivided in two subtasks:
- 1A) PCB Project € 19000
- 1B) Fast SI bus simulations €5000
In other words, we reached an encouraging 34% of what is required for subtask 1A.
As we really want to speed up as much as possible the activity, we decided to formally split phase 1, and not to wait to reach €24000 to start the design of the PCB.
To do so, we signed a contract with ACube Systems (company we rely on for the design) just for subtask 1A. Doing so gives the chance to start right now the PCB design. At the time of signing the contract, we paid €6000, the amount required by the designer to start working.
One of the reasons forcing us to speed up the planned activities, is linked to the availability of the Slimbook model “Eclipse” that will not last forever, very much like any other commercially available products such as the electronic components we selected during the electrical schematics design phase. In fact, the electrical schematics are customized for the pinouts of that specific Slimbook model, and the PCB design will be specifically shaped to fit in the Slimbook Eclipse chassis. Because of these constraints, we have to finish the PCB design (phase 1A), the fast SI bus simulations (phase 1B) and the prototypes (phase 2) around this summer.
We fixed the end of April 2020 as the time-limit for phase 1A, so we have 3 months left to raise the remaining €12500. As you may well understand this goal is quite ambitious, but it is necessary if we don’t want to risk to fail.